LXE MX7 Tecton CE Reference Manual page 119

Options
Option
Continuous Search
Filtered Mode
Printer Port - COM9
Logging
Computer Friendly Name
1
Personal Aea Networking profile. Un-modified Ethernet payloads (using BNEP) can exchange packets between Bluetooth
devices. PANU is a PAN User service that uses either the NAP or the GN service.
1
Dial-Up Networking provides access to the Internet and other dial-up services using Bluetooth technology.
1
Human Interface Device profiles used by Bluetooth keyboards, mice, pointing devices and remote monitoring devices.
This option is Disabled by default.
When enabled, the Bluetooth connection never stops searching for a device it has paired with
when the connection is broken (such as the paired device entering Suspend mode, going out of
range or being turned off). When disabled, after being enabled, the MX7 Tecton stops searching
after 30 minutes. This option draws power from the Main Battery.
This option is Enabled by default.
Determines whether the Bluetooth client discovers and displays all serial Bluetooth devices in
the vicinity (Filtered Mode is disabled/unchecked) or the discovery result displays Bluetooth
scanners and printers only (Filtered Mode is enabled/checked).
When Filtered Mode is disabled, the MX7 Tecton can pair with up to four Bluetooth devices,
with a limit of one Bluetooth scanner, one Bluetooth printer, one
connected at the same time. More than one
Bluetooth mouse and one Bluetooth keyboard.
A Restart is required every time Filtered Mode is toggled on and off.
This option is Disabled by default.
This option assigns Bluetooth printer connection to COM9 instead of COM19. To enable this
option, Filtered Mode must be disabled/unchecked.
This option is Disabled by default.
When logging is enabled, the MX7 Tecton creates bt_log.txt and stores it in the /System folder.
Bluetooth activity logging is added to the text file as activity progresses. A bt_log_bak.txt file
contains the data stored by bt_log.txt prior to reboot.
During a reboot process, the MX7 Tecton renames bt_log.txt to bt_log_bak.txt. If a file already
exists with that name, the existing file is deleted, the new bt_log_bak.txt file is added and a
new bt_log.txt is created.
This option is empty (null) by default.
The name, or identifier, entered in this space by the System Administrator is used exclusively
by Bluetooth devices and during Bluetooth communication.
E-EQ-MX7CERG-A [ 107 ] MX7 Tecton™ CE Reference Guide
Information
PAN
1
HID device can be connected but only one
1 1
, and one DUN