LXE MX7 Tecton CE Reference Manual page 260

Profile Parameters
Parameter Default
Specify 802.11a, 802.11b and/or 802.11g rates when communicating with the AP. The options
displayed for this parameter depend on the type of radio installed in the mobile device.
Options:
BGA
Radio
Rates
Mode
Full
Default:
It is important the Radio Mode parameter correspond to the AP to which the device is to connect. For example, if this
parameter is set to G rates only, the MX7 Tecton may only connect to APs set for G rates and not those set for B and G rates.
Contact your LXE representative
B rates only (1, 2, 5.5 and 11 Mbps)
BG Rates Full (All B and G rates)
G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
BG optimized or BG subset (1, 2, 5.5, 6, 11, 24, 36 and 54 Mbps)
A rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
ABG Rates Full (All A rates and all B and G rates with A rates preferred)
BGA Rates Full (All B and G rates and all A rates with B and G rates preferred)
Ad Hoc (when connecting to another client device instead of an AP)
BGA Rates Full (for 802.11a/b/g radio)
if you have questions about the antenna(s) installed on your MX7 Tecton.
E-EQ-MX7CERG-A [ 248 ] MX7 Tecton™ CE Reference Guide
Explanation