Wavelink Avalanche Enabler (Optional); Internet Explorer - LXE MX7 Tecton CE Reference Manual

Wavelink Avalanche Enabler (Optional)

Wavelink Avalanche Enabler (Optional)
Note: If the user is NOT using Wavelink Avalanche to manage their mobile device, the Enabler should not be installed on
the mobile device(s).
The following features are supported by the Wavelink Avalanche Enabler when used in conjunction with the Avalanche
Manager.
After configuration, Enabler files are installed upon initial bootup and after a hard reset. Network parameter configuration is
supported for:
IP address: DHCP or static IP
l
RF network SSID
l
DNS hosts (primary, secondary, tertiary)
l
Subnet mask
l
Enabler update
l
Related Manual: Using Wavelink Avalanche on LXE Windows Computers
The MX7 Tecton has the Avalanche Enabler installation files loaded, but not installed, on the mobile device when it is shipped
from LXE. The installation files are located in the System folder on CE devices. The installation application must be run
manually the first time Avalanche is used.
After the installation application is manually run, a reboot is necessary for the Enabler to begin normal performance. Following
this reboot, the Enabler will by default be an auto-launch application. This behavior can be modified by accessing the
Avalanche Update Settings panel through the Enabler Interface.
The designation of the mobile device to the Avalanche CE Manager is LXE_MX7CE.

Internet Explorer

Start | Programs | Internet Explorer
This option requires a radio card and an Internet Service Provider. There are a few changes in the Windows CE version of
Internet Explorer as it relates to the general desktop Windows PC Internet Explorer options. Tap the "?" button to access
Internet Explorer Help.
E-EQ-MX7CERG-A [ 33 ] MX7 Tecton™ CE Reference Guide