LXE MX7 Tecton CE Reference Manual page 266

Global Parameters
Parameter Default
WMM Off
Auth
Type 1
Server
TTLS Inner
Auto-EAP
Method
PMK Cach-
Standard
ing
TX
ABG: On
Diversity
Contact your LXE representative
roaming, AP specified maximum transmit power and radio management.
This parameter cannot be changed.
Use of Wi-Fi Multimedia extensions.
Options are: On, Off
Specifies the type of authentication server.
Options are: Type 1 (ACS server) and Type 2 (non-ACS server)
Authentication method used within the secure tunnel created by EAP-TTLS.
Options are:
AUTO-EAP (Any available EAP method)
MSCHAPV2
MSCHAP
PAP
CHAP
EAP-MSCHAPV2
Type of Pairwise Master Key (PMK) caching to use when WPA2 is in use. PMK caching is designed
to speed up roaming between APs by allowing the client and the AP to cache the results of 802.1X
authentications, eliminating the need to communicate with the ACS server. Standard PMK is used
when there are no controllers. The reauthentication information is cached on the original AP. The
client and the AP use the cached information to perform the four-way handshake to exchange keys.
Opportunistic PMK (OPMK) is used when there are controllers. The reauthentication information
cached on the controllers. The client and the controller behind the AP use the cached information to
perform the four-way handshake to exchange keys.
If the selected PMK caching method is not supported by the network infrastructure, every roam
requires full 802.11X authentication, including interaction with the ACS server.
If the active profile is using WPA2 CCKM, the global PMK Caching setting is ignored and the client
attempts to use CCKM.
Options are: Standard, OPMK
Note: This change does not take effect until after a Suspend/Resume cycle.
How to handle antenna diversity when transmitting packets to the Access Point.
Options are: Main only, and On.
if you have questions about the antenna(s) installed on your MX7 Tecton.
E-EQ-MX7CERG-A [ 254 ] MX7 Tecton™ CE Reference Guide
Function