LXE MX7 Tecton CE Reference Manual page 267

Global Parameters
Parameter Default
ABG: On Start on
RX Diversity
Main
Contact your LXE representative
Parameter Default
Frag
2346
Thresh
RTS
2347
Thresh
LED Off
Tray Icon On
Hide
On
Password
SUMMIT
Admin
(or
Password
Blank)
Auth 8
Timeout seconds
Certs Path System
How to handle antenna diversity when receiving packets from the Access Point.
Options are: On-start on Main, and Main only
if you have questions about the antenna(s) installed on your MX7 Tecton.
If the packet size (in bytes) exceeds the specified number of bytes set in the fragment threshold, the
packet is fragmented (sent as several pieces instead of as one block). Use a low setting in areas
where communication is poor or where there is a great deal of wireless interference.
This parameter cannot be changed.
If the packet size exceeds the specified number of bytes set in the Request to Send (RTS) threshold,
an RTS is sent before sending the packet. A low RTS threshold setting can be useful in areas where
many client devices are associating with the Access Point.
This parameter cannot be changed.
The LED on the wireless card is not visible to the user when the wireless card is installed in a sealed
mobile device.
Options are: On, Off.
This parameter cannot be changed.
Determines if the Summit icon is displayed in the System tray.
Options are: On, Off
When On, the Summit Config Utility masks passwords (characters on the screen are displayed as an
*) as they are typed and when they are viewed. When Off, password characters are not masked.
Options are: On, Off.
A string of up to 64 alphanumeric characters that must be entered when the Admin Login button is
tapped. If Hide Password is On, the password is masked when typed in the Admin Password Entry
dialog box. The password is case sensitive. This value is masked when the Admin is logged out.
Options are: none.
Specifies the number of seconds the Summit software waits for an EAP authentication request to
succeed or fail.
If the authentication credentials are stored in the active profile and the authentication times out, the
association fails. No error message or prompting for corrected credentials is displayed.
If the authentication credentials are not stored in the active profile and the authentication times out,
the user is again prompted to enter the credentials.
Options are: An integer from 3 to 60.
A valid directory path, of up to 64 characters, where WPA Certificate Authority and User Certificates
are stored on the mobile device when not using the Windows certifcates store. LXE suggests
ensuring the Windows folder path currently exists before assigning the path in this parameter. See
Certificates for instructions on obtaining CA and User Certificates. This value is masked when the
Admin is logged out.
Options are: none.
For example, when the valid certificate is stored as My Computer/System/MYCERTIFICATE.CER,
enter System in the Certs Path text box as the Windows folder path.
E-EQ-MX7CERG-A [ 255 ] MX7 Tecton™ CE Reference Guide
Function
Function