Keymap Tab - LXE MX7 Tecton CE Reference Manual

KeyMap Tab

KeyMap Tab
Assign settings by clicking radio buttons and selecting keys from the drop down boxes. Tap the OK button when finished. The
changes take effect immediately.
How to Remap a Single Key
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pulldown list.
3. Select the value from the remapped key from the Remapped Key pulldown list.
4. Click OK to save the result and close the control panel.
How to Remap a Key Sequence
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pulldown list.
3. Select Key Sequence from the Remapped Key pulldown list.
4. Select the first key for the multiple key sequence from the pulldown list. Press the Add button to add the key to the mul-
tiple key sequence shown in the Key Sequence box. Repeat this step until all keys desired have been added to the key
sequence. If necessary, use the Clear button to erase all entries in the Key Sequence box.
5. Click OK to save the result and close the control panel.
Note: A key can only be used once in a multiple key sequence. For example, an F1 key added to a key sequence means
an F1 key cannot be used again in the same key sequence.
55 Key Keypad
E-EQ-MX7CERG-A [ 183 ] MX7 Tecton™ CE Reference Guide
32 Key Keypad