Bluetooth Device Menu - LXE MX7 Tecton CE Reference Manual

Bluetooth Device Menu

Bluetooth Device Menu
Pre-requisite: The Discover button has been clicked and there are Bluetooth devices listed.
Click on a device in the list to highlight it. Doubleclick the highlighted device to display the Bluetooth Device right click menu.
The Bluetooth device does not need to be active.
Right Click Menu Options
Pair as Scanner
Pair as Printer
Pair as Serial Device
Pair as HID Device
Pair as PAN Device
(PANU to NAP)
Pair as DUN Device
Disconnect
Delete
Properties
1
Human Interface Device profiles used by Bluetooth keyboards, mice, pointing devices and remote monitoring devices.
1
Personal Aea Networking profile. Un-modified Ethernet payloads (using BNEP) can exchange packets between Bluetooth
devices. PANU is a PAN User service that uses either the NAP or the GN service.
1
Dial-Up Networking provides access to the Internet and other dial-up services using Bluetooth technology.
Receive data from the highlighted Bluetooth scanner or Bluetooth imager.
Send data to the highlighted Bluetooth printer.
Communicate with the highlighted serial Bluetooth device. This option is available when Filtered
Mode is disabled.
Communicate with the highlighted
tered Mode is disabled/unchecked.
Communicate with the highlighted
able when Filtered Mode is disabled/unchecked.
Communicate with the highlighted
when Filtered Mode is disabled/unchecked.
Stop the connection between the MX7 Tecton and the highlighted paired Bluetooth device.
Remove an unpaired device from the Bluetooth device list. The highlighted device name and iden-
tifier is removed from the MX7 Tecton Bluetooth Devices panel after the user taps OK.
More information on the highlighted Bluetooth device.
E-EQ-MX7CERG-A [ 103 ] MX7 Tecton™ CE Reference Guide
Right Click Menu
1
HID (Human Interface Device). This option is available when Fil-
1
PAN (Personal Area Networking) device. This option is avail-
1
DUN (Dial-Up Networking) device. This option is available