Enable, Min, Max - LXE MX7 Tecton CE Reference Manual

Enable, Min, Max

Enable, Min, Max
Enable
This checkbox enables (checked) or disables (unchecked) the symbology field.
The scanner driver searches the beginning of the barcode data for the type of ID specified in the Data Options tab -- Enable
Code ID field plus any custom identifiers.
When a code ID match is found as the scanner driver processes incoming barcode data, if the symbology is disabled, the
barcode is rejected. Otherwise, the other settings in the dialog are applied and the barcode is processed.
If the symbology is disabled, all other fields on this dialog are dimmed.
If there are customized settings, uncheck the Enable checkbox for the All symbology. This results in disabling all symbologies
except the customized ones.
Min
This field specifies the minimum length that the barcode data (not including Code ID) must meet to be processed.
Any barcode scanned that is less than the number of characters specified in the Min field is rejected. The default for this field is
1.
Max
This field specifies the maximum length that the barcode data (not including Code ID) can be processed. Any barcode scanned
that has more characters than specified in the Max field is rejected. The default for this field is All (9999).
If the value entered is greater than the maximum value allowed for that symbology, the maximum valid length is used instead.
E-EQ-MX7CERG-A [ 130 ] MX7 Tecton™ CE Reference Guide