Using Bluetooth; Initial Use - LXE MX7 Tecton CE Reference Manual

Using Bluetooth

Using Bluetooth
Start | Settings | Control Panel | Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop
or Tap the Bluetooth icon in the taskbar to open the Bluetooth LXEZ Pairing application.
The MX7 Tecton default Bluetooth setting is Enabled.
The LXE MX7 Tecton Bluetooth
Prerequisite: The Bluetooth devices have been setup to allow them to be "Discovered" and "Connected/Paired". The System
Administrator is familiar with the pairing function of the Bluetooth devices.
Note: When Filtered Mode is Enabled, only LXE Bluetooth printers or Bluetooth scanners/imagers are recognized and
displayed in the Bluetooth panel. All other Bluetooth devices are ignored.

Initial Use

1. Select Start | Settings | Control Panel | Bluetooth or tap the Bluetooth icon in the taskbar or on the desktop.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth MX7 Tecton default name is
determined by the factory installed software version. LXE strongly urges assigning every MX7 Tecton a unique name
(up to 32 characters) before Bluetooth Discovery is initiated.
4. Check or uncheck the MX7 Tecton Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
®
module is designed to Discover and pair with nearby Bluetooth devices.
Bluetooth Devices Display – Before Discovering Devices
E-EQ-MX7CERG-A [ 109 ] MX7 Tecton™ CE Reference Guide