Enable Code Id; Buttons - LXE MX7 Tecton CE Reference Manual

Enable Code ID

Enable Code ID
Choose an option in the Enable Code ID drop-down box:
None
AIM ID
Symbol ID
HHP ID
Custom ID

Buttons

Symbology Settings
Ctrl Char Mapping
Custom Identifiers
HHP Properties
See "Data Processing Overview" on page 119
Disables transmission of a Code ID. The only entry in the Symbology combo box is All.
Transmits the AIM ID with each barcode. The combo box in the Symbology panel is populated with
the known AIM ID symbologies for the scan engine in focus, plus any configured Custom code IDs.
Transmits the Symbol ID with each barcode. The combo box in the Symbology panel is populated
with the known Symbol ID symbologies for the scan engine in focus, plus any configured Custom
code IDs.
The imager always transmits the HHP ID with each barcode, so the Code ID is used to identify the
barcode being processed. The combo box in the Symbology control panel is populated with the
known HHP ID symbologies for that platform, plus any configured Custom code IDs.
Does not change the scanner's Code ID transmission setting. The combo box in the Symbology con-
trol panel is populated with any configured Custom code IDs.
E-EQ-MX7CERG-A [ 126 ] MX7 Tecton™ CE Reference Guide
Individually enable or disable a barcode from being scanned, set the mini-
mum and maximum size barcode to accept, strip Code ID, strip data from
the beginning or end of a barcode, or (based on configurable Barcode Data)
add a prefix or suffix to a barcode before transmission.
Define the operations the LXE Wedge performs on control characters
(values less than 0x20) embedded in barcodes.
Defines an identifier that is at the beginning of barcode data which acts as
a Code ID. After a Custom Identifier is defined, Symbology Settings can
be defined for the identifier just like standard Code IDs.
HHP Properties allows HHP global (not symbology specific) parameters
to be configured. This button is only visible when an HHP 5300 imager is
installed in the MX7 Tecton.