Bluetooth - LXE MX7 Tecton CE Reference Manual

Bluetooth

Bluetooth
Start | Settings | Control Panel | Bluetooth
Discover and manage pairing with nearby Bluetooth devices.
Factory Default Settings
Discovered
None
Devices
Settings
Turn Off
Disabled
Bluetooth
Report when
Enabled
connection lost
Report when
Disabled
reconnected
Report failure to
Enabled
reconnect
Computer is
Enabled
connectable
Computer is
Disabled
discoverable
Prompt if devices
Disabled
request to pair
Continuous
Disabled
search
Filtered Mode Enabled
Printer Port on Disabled (unchecked) by default in both Filtered and Non Filtered
COM9: Modes. The option is dimmed in Non Filtered Mode.
Logging Disabled
Computer
System Device Name
Friendly Name
Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected
and disconnected. There may be audible or visual signals as paired devices re-connect with the MX7 Tecton.
The default Bluetooth setting is On.
l
The MX7 Tecton cannot be discovered by other Bluetooth devices when the Computer is discoverable option is dis-
l
abled (unchecked) on the Settings panel.
Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.
l
When Filtered Mode is enabled, the MX7 Tecton can pair with one Bluetooth scanner and one Bluetooth printer.
l
1
Human Interface Device profiles used by Bluetooth keyboards, mice, pointing devices and remote monitoring devices.
2
Personal Aea Networking profile. Un-modified Ethernet payloads (using BNEP) can exchange packets between Bluetooth
devices. PANU is a PAN User service that uses either the NAP or the GN service.
E-EQ-MX7CERG-A [ 98 ] MX7 Tecton™ CE Reference Guide