Network Card Specifications; Summit 802.11 A/B/G Sdio 2.4/5.0Ghz; Bluetooth; Ac Wall Adapter - LXE MX7 Tecton CE Reference Manual

Network Card Specifications

Network Card Specifications

Summit 802.11 a/b/g SDIO 2.4/5.0GHz

Wireless Frequencies
RF Data Rates
RF Power Level
Channels
Operating Temperature
Storage Temperature
Connectivity
Diversity

Bluetooth

Connection
Operating Frequency
Bluetooth Version

AC Wall Adapter

Input Power Switch
Power "ON" Indicator
Input Fusing
Input Voltage
Input Frequency
Input Connector
Output Connector
Output Voltage
Output Current
Operating Temperature
Storage Temperature
Humidity
2.4 to 2.4897 GHz IEEE 802.11b / 802.11g DSSS OFDM
5.0GHz IEEE 802.11a DSSS OFDM
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
64 mW (18dBm)
1-11 FCC, 1-13 ETSI
Same as MX7 Tecton
Same as MX7 Tecton
TCP/IP, Ethernet, ODI
Yes
No more than 32.80 feet (10 meters) line of sight
2.402 – 2.480 GHz
2.1 + EDR
None
None
Thermal Fuse
100VAC min – 240 VAC max
50 - 60 Hz
North American wall plug, no ground
AC wall adapter has a 5.5mm barrel connector. This connects to the LXE cables which
transition power to the 20 pin D connector.
+12V, regulated
0 Amps min, 1.25 Amps max
32 F to 100° F / -0° C to 40° C
The LXE-approved AC Power Adapter is only intended for use in a 25°C (77°F) maximum
ambient temperature environment.
-40° F to 180° F / -40° C to 80° C
Operates in a relative humidity of 5 – 95% (non-condensing)
E-EQ-MX7CERG-A [ 319 ] MX7 Tecton™ CE Reference Guide
Operating Temperature
Storage Temperature