Inspecting The Mechanical Stop Pin, Axis 1 - ABB IRB 4600 - 40/2.55 Product Manual

3.3.8 Inspecting the mechanical stop pin, axis 1

Location of mechanical stop pin, axis 1
The mechanical stop pin is located on the frame as shown in the figure.
xx0800000298
A
B
Required equipment
Equipment
Mechanical stop pin axis 1
Standard toolkit
Other tools and procedures
may be required. See refer-
ences to these procedures in
the step-by-step instructions
below.
3HAC033453-001 Revision: H
A
Fixed stop
Mechanical stop pin, axis 1
© Copyright 2009-2013 ABB. All rights reserved.
3.3.8 Inspecting the mechanical stop pin, axis 1
B
Art. no.
See Spare part list on
page 345.
3 Maintenance
Note
Content is defined in section
Standard tools on page 341.
These procedures include
references to the tools re-
quired.
Continues on next page
137