3.3.2 Inspecting the oil level, axis 2 gearbox
Location of axis 2 gearbox
The axis 2 gearbox is located in the lower arm rotational center, underneath the
motor attachment. The oil plugs are shown in the figure.
xx0800000305
A
B
Required equipment
Equipment
Only valid for Other design than Type C:
Oil plug sealing washer, gearbox
Lubrication oil
Oil plug (Quick connect fitting)
Standard toolkit
Other tools and procedures may be required.
See references to these procedures in the
step-by-step instructions below.
3HAC033453-001 Revision: H
Oil plug, filling
Oil plug, draining (Quick connect fitting)
© Copyright 2009-2013 ABB. All rights reserved.
3.3.2 Inspecting the oil level, axis 2 gearbox
Note
3HAC029646-001
See section
Type of lubrication in gearboxes
on page
148.
For article number see
page
345.
Content is defined in section
on page
341.
These procedures include references to the
tools required.
Continues on next page
3 Maintenance
Spare part list on
Standard tools
121