Configure Alarm Triggered Recording; Configure Pos Event Triggered Recording - HIKVISION DS-7716NXI-I4/16P/4S User Manual

DS-77xxNXI-I4/16P/4S NVR User Manual
2. Configure the event detection and select the channel(s) to trigger the recording when an event occurs.
Chapter 11 Event and Alarm Settings
Refer to
3. Go to Camera > Encoding Parameters > Recording Parameters.
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage > Recording Schedule.
6. Select Event recording type.
7. Set the schedule for the event triggered recording. Refer to
for details.

7.8 Configure Alarm Triggered Recording

You can configure recordings triggered by motion detection, vehicle detection, line crossing detection,
etc.
1. Go to System > Event > Normal Event > Alarm Input.
2. Configure the alarm input and select the channel(s) to trigger recording when an alarm occurs. Refer
Chapter 11 Event and Alarm Settings
to
3. Go to Camera > Encoding Parameters > Recording Parameters.
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage > Recording Schedule.
6. Select Alarm recording type.
7. Set the schedule for the alarm triggered recording. Refer to
for details.

7.9 Configure POS Event Triggered Recording

You can configure recordings triggered by the connected POS event such as the transaction, etc.
1. Go to System > POS Settings.
2. Configure the POS and select the channel(s) in the Event Linkage to trigger the recording when a POS
event occurs. Refer to
3. Go to Camera > Encoding Parameters > Recording Parameters.
4. Set the event main stream/sub-stream recording parameters for the camera.
5. Go to Storage > Recording Schedule.
UM DS-77xxNXI-I4/16P/4S 050619NA
Chapter 12 VCA Event Alarm
and
Chapter 13
for details.
Chapter 12 VCA Event Alarm
and
Chapter 7.4 Configure Recording Schedule
Chapter 7.4 Configure Recording Schedule
for details.
for details.
75