Table of Contents
Advertisement
Network Video Recorder
8. Click OK.
Note
Up to 8 TB storage capacity is allowed for each network disk.
Result
The added network disks will be displayed in the storage device list.
6.5.4 Configure Storage Mode
Configure HDD Groups
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.
Steps
1. Go to Configuration → Record → Storage Mode .
2. Select Mode as Group.
3. Select a group number.
4. Select IP cameras to record on the HDD group.
Figure 6-26 Group
5. Click Apply.
6. Restart the video recorder to activate the new storage mode settings.
7. After restart, go to Configuration → Record → Storage .
8. Click
of desired HDD to set the group.
9. Select a group number for the current HDD.
10. Click OK.
Note
Regroup the cameras for HDD if the HDD group number is changed.
Configure HDD Quota
Each camera can be configured with an allocated quota for storing videos.
71
Advertisement
Table of Contents
