Set Linear Scan Limit; One-Touch Park - HIKVISION IDS-9664NXI-I8/X(STD)(C) User Manual

3. Select a pattern.
4. Click Call to start the pattern.
5. Optional: Click Stop to stop the pattern.

3.11.8 Set Linear Scan Limit

Linear Scan trigger a scan in the horizontal direction in the predefined range.
Before You Start
Make sure the connected IP camera supports the PTZ function and is properly connected.
Note
This function is supported only by some certain models.
Steps
1. Click on the quick settings toolbar of the PTZ camera's live view.
2. Click directional buttons to wheel the camera to a location, and click Left Limit or Right Limit to
link the location to the corresponding limit.
Note
The speed dome linear scans from the left limit to the right limit, and you must set the left limit
on the left side of the right limit. Also, the angle from the left limit to the right limit must be no
more greater than 180º.

3.11.9 One-Touch Park

Certain speed dome models can be configured to start a predefined park action (scan, preset,
patrol and etc.) automatically after a period of inactivity (park time).
Before You Start
Before operating this function, make sure the connected camera supports linear scan and is in
HIKVISION protocol.
Network Video Recorder User Manual
Figure 3-20 Pattern Configuration
35