Configuring Snmp - HIKVISION iDS-9632NXI-I8/16S User Manual

The time synchronization interval can be set from1 to 10080min, and the default value is 60min. If
the NVR is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the NVR is setup in a more customized network, NTP software can be used to
establish a NTP server used for time synchronization.

13.2.4 Configuring SNMP

Purpose:
You can use SNMP protocol to get device status and parameters related information.
Step 1 Go to Menu >Configuration >Network.
Step 2 Select the SNMP tab to enter the SNMP Settings interface, as shown in Figure 13-7.
Step 3 Check the SNMP checkbox to enable this feature.
Step 4 The enabling of SNMP may cause security problems. Click Yes to continue or No to cancel
the operation.
Step 5 When you choose the Yes option in step4, configure the following SNMP settings:
Trap Address: IP Address of SNMP host.
Trap Port: Port of SNMP host.
Step 6 Click the Apply button to save and exit the interface.
Network Video Recorder User Manual
Figure 13-7 SNMP Settings Interface
Figure 13-8 SNMP Settings Interface
182