Air Cleaner Cleaning - Honda CB450 1968 Service Manual

152
Fig . 6. 18 Oil filter cover
installation
CD
Oil
ni ter opening
®
O i l filter cover
®
Oil filt er opening
Fig. 6. 19 A ir cleaner cover remov ing
(D
Air cleaner case
@
Air cleaner cover
®
Ai r cleaner setting bolt
©
6 X 10 hex bolt
Fig. 6. 20 Air cleaner cl eaning
CD
A ir clea ner ele ment
®
Brush
6. INSPECTION AND ADJUSTMENT
(41 When reinstal ling the oil filter cover, match
t he right crankcase cover oil filte r ope ning
and the filte r cover oil open ing.
(Fig. 6. 18)
7. Air cleaner clean ing
When the air cleaner is clogged with dirt,
ai r is not taken in freely, sufficient engine power
cannot be obtained and acceleration is faulty.
Clean the air cleaner periodically.
1.
Remove air cleaner case.
2. Unscrew air cleaner cover setting bolt and
then remove the air c leaner cover .
3.
Unscrew the 6 mm hex bolt, loosen the ai
r
cleaner connectin g tube set ting screw and remov e
the air cleaner element. (Fig. 6. 19)
4.
Top the element to loosen the dust and then
apply dry compressed air from the inside to
remove the dust.
(Fig. 6. 20)
NOTE:
111 The air cleaner is paper . When broken ,
rep lace .
121 Do no t leave oil on the filter element as
it prevents air filterat ion.
131 Inspect the filter element con necti ng line and
connec tor for peeling, breakage, broke n rubber,
and ot her damage.