Furuno FAR-1416 Operator's Manual page 78

1. OPERATIONAL OVERVIEW
2. Select [NAV DATA], then press the left button.
3. Select [NEXT], then press the left button.
4. Select [LORAN/DECCA SETTING], then press the left button.
There are two pages for [LORAN DECCA SETTING] window. If the second page
is appeared, press the MARK SELECT key to go back to the first page.
5. Select [LORAN C STA. COMB.], then press the left button.
6. Set the station combination refer to the [GRI CODE LIST] lower side of the win-
dow. Set the main station and reference station channels.
7. Select [TIME OFFSET 1], then press the left button.
8. Rotate the scrollwheel and press the left button to set the time offset value.
9. Select [TIME OFFSET 2], then press the left button.
10. Rotate the scrollwheel and press the left button to set the time offset value.
11. Press the MARK key to go to the second page.
12. Select [TIME DIFF. DISP TYPE], then press the left button.
13. Select [LORAN A], then press the left button.
14. Close the menu.
When using Decca chain offset
1. Open the [MAIN MENU].
2. Select [NAV DATA], then press the left button.
3. Select [NEXT], then press the left button.
4. Select [LORAN/DECCA SETTING], then press the left button.
There are two pages for [LORAN DECCA SETTING] window. If the first page is
appeared, press the MARK key to go to the second page.
5. Select [DECCA CHAIN], then press the left button.
6. Set the Decca chain refer to the [CH CODE] lower side of the window.
7. Select [OFFSET VALUE 1], then press the left button.
8. Rotate the scrollwheel and press the left button to set the offset value.
9. Select [OFFSET VALUE 2], then press the left button.
10. Rotate the scrollwheel and press the left button to set the offset value.
11. Select [TIME DIFF. DISP TYPE], then press the left button.
12. Select [DECCA], then press the left button.
13. Close the menu.
1-64