Load The Backup Data - Furuno FAR-1416 Operator's Manual

2. Open the [MAIN MENU].
3. Select [MEMORY REC./PLAY.], then press the left button.
4. Select [NEXT], then press the left button.
5. Select [SAVE BACKUP DATA], then press the left button.
6. Select [SAVE TO USB MEMORY], then press the left button.
7. Select [RUN], then press the left button.
8. Close the menu.
How to backup the data to internal memory
1. Open the [MAIN MENU].
2. Select [MEMORY REC./PLAY.], then press the left button.
3. Select [NEXT], then press the left button.
4. Select [SAVE BACKUP DATA], then press the left button.
5. Select [SAVE TO INT. MEMORY], then press the left button.
6. Select [RUN], then press the left button.
7. Close the menu.
6.4.3

Load the backup data

There are two methods to read the backup data.
• USB flash memory
• Internal memory
How to load the data from USB flash memory
1. Insert the USB flash memory to the USB port.
2. Press [ST-BY/TX] key to turn the stand-by mode.
The following procedure is not available in TX mode.
3. Open the [MAIN MENU].
4. Select [MEMORY REC./PLAY.], then press the left button.
5. Select [NEXT], then press the left button.
6. Select [READING BACKUP DATA], then press the left button.
7. Select [READ FROM USB MEMORY], then press the left button.
8. Select [RUN], then press the left button.
The confirmation message appears, then the system will be restarted.
How to load the data from internal memory
1. Open the [MAIN MENU].
2. Select [MEMORY REC./PLAY.], then press the left button.
3. Select [NEXT], then press the left button.
4. Select [READING BACKUP DATA], then press the left button.
5. Select [READ FROM INTERNAL MEMORY], then press the left button.
6. Select [RUN], then press the left button.
A message appears, then the system restarts.
6. DATA SAVE AND READ
6-11