How To Display The Detailed Depth Line; Explanations On Chart Menu - Furuno FAR-1416 Operator's Manual

5.8.6

How to display the detailed depth line

The depth line can be displayed with a detailed range interval if the currently shown
depth lines are too widely separated.
1. Press the MENU key to open the [MAIN MENU].
2. Select [CHART], then press the left button.
3. Select [DEPTH LINE FINE RANGE], then press the left
button.
4. Select the range to display closely, then press the left
button.
Selected range will be displayed in a window as below.
5. Set the level to display the detailed depth line, then press
the left button.
When bigger level is selected, the depth line will be dis-
played in details, but the chart drawing time will be lon-
ger.
Note: The depth line display does not change at some
range even if the detail level is changed.
6. Close the menu.
5.8.7

Explanations on chart menu

Below is the explanation about the each item of
[CHART] menu.
[BORDER LINE LEVEL]: Select to display the outline
of landmass or not. To display the outline, the thick-
ness of outline can be selected from three types. The
larger the number the thicker the outline.
[LAT/LON. GRID]: Select to display the grid of lati-
tude and longitude or not. When displaying, the color
can be selected from seven colors.
5. VIDEO PLOTTER OPERATION
DEPTH LINE FINE RANGE
TURN WHEEL : SELECT
PRESS LEFT BUTTON : ENTER
PRESS RIGHT BUTTON : BACK
[CHART]
1. BACK
2. [CHART SETTING]
3. DEPTH LINE SETTINGS
4. BORDER LINE LEVEL
OFF/1/2/3
5. CHANGE CHARTS
VECTOR/FISHING/
C-MAP/NAVIONICS
6. CHART DISPLAY
OFF/ON
7. LAT/LON. GRID
OFF/RED/YEL/GRN/
CYA/MAG/BLU/WHT
8. DEPTH LINE FINE RANGE
5-55