Presentation Modes; How To Select A Presentation Mode; Description Of Presentation Modes - Furuno FAR-1416 Operator's Manual

1. OPERATIONAL OVERVIEW
1.12

Presentation Modes

This radar has the following presentation modes available:
Relative Motion (RM)
HEAD UP
STAB HEAD UP : Head-up with compass bearing scale (True Bearing) where the
STERN UP
COURSE UP
GO TO UP
NORTH UP
True Motion (TM)
Land objects and sea are stationary. Requires compass and speed data.
1.12.1

How to select a presentation mode

The presentation mode can be changed with using the display mode box.
1. Press the CURSOR ON/OFF key when cursor is not shown.
2. Move the cursor onto the display mode box.
3. Press the left button several times to change the presentation mode.
The presentation mode changes in the following order with each press of the left
button.
HEAD UP, STAB HEAD UP, STERN UP, COURSE UP, GO TO UP, NORTH UP.
Note 1: STERN UP is shown when [STERN UP RN] is set to [ON] in [OPERA-
TION SETTING] of the [INITIAL SETTING] menu.
Note 2: The bearing data at the top on the screen shows "***,*°" when the navi-
gation data is lost. The north mark disappears, and presentation mode goes back
to the head up mode and also TT/AIS targets disappear. When the navigation
data is input again, presentation mode goes back the previous mode automatical-
ly.
1.12.2

Description of presentation modes

HEAD UP mode
A display without azimuth stabilization in which the line
that connects the center with the top of the display indi-
cates your heading. Targets are shown at their measured
distances and their directions relative to your heading.
The short dotted line on the bearing scale is the north
marker.
Note 1: When off-centering is active, the heading line
shows "000°".
1-16
: Not stabilized
bearing scale rotates with the compass reading.
: The radar image is rotated 180°. Graphics and relative and true
bearings are also rotated 180°.
: Compass-stabilized relative to ship's orientation at the time of se-
lecting COURSE UP.
: The waypoint is shown in the top of the screen, while the waypoint
is set as a destination. When the waypoint is no longer a destination,
the presentation mode is reset to HEAD UP mode.
: Compass-stabilized with reference to North.
Heading line
North marker