Display The Internal Memory Data - Furuno FAR-1416 Operator's Manual

6. DATA SAVE AND READ
1. Open the [MAIN MENU].
2. Select [MEMORY REC./PLAY.], then press the left button
to open the menu.
Note: The non-active menu indicated as gray characters.
3. Select [INT. MEMORY RECORDING], then press the left button.
The internal memory recording menu appears.
4. Select the item required, then press the left button.
5. Select [YES], then press the left button.
6. Repeat the step 4 and 5 to save other data.
7. Select the block required to save the data.
A character input window is displayed. The current date is displayed automatical-
ly. Go on the following step to change the comment.
8. Enter the comment to refer to page 1-16. (15 characters max.)
9. Select [YES] and press left button.
10. Close the menu
6.2.2

Display the internal memory data

To display the internal memory data, do following procedure.
1. Open the [MAIN MENU].
2. Select [MEMORY REC./PLAY.], then press the left button.
6-2
INTERNAL MEMORY RECORDING
REC OWN TRK : YES
REC OTHER TRK : YES
RECORD MARK/TRACK : YES
RECORD ROUTE/WPT : YES
DOWNLOAD SETTINGS : YES
DATA SELECTION OWN TRK OTR TRK
DATA
1: NO DATA
2: NO DATA
3: NO DATA
4: NO DATA
5: NO DATA
6: NO DATA
7: NO DATA
8: NO DATA
9: NO DATA
0: NO DATA
CURRENT USAGE OWN TRK
OTHER TRK (CONS)
OTHER TRK (AIS)
OTHER TRK (TT)
OTHER TRK (GPS BUOY)
MARK/LINE
TURN WHEEL : SELECT PRESS LEFT BUTTON : ENTER
PRESS RIGHT BUTTON : CLOSE
SELECT THE FILE TO RECORD
[MEMORY REC./PLAY. 1/2]
1. BACK
2. USB MEMORY RECORDING
3. USB MEMORY PLAYBACK
4. INT. MEMORY RECORDING
5. INT. MEMORY PLAYBACK
6. TRF USB TO INT. MEMORY
7. DISPLAY INT. MEMORY
8. [AUTO BACKUP]
9. REMOVE USB MEMORY
NO
NO
NO
NO
NO
MARK WPT ROUTE
: 164 /30000
: 0 /10000
: 0 /10000
: 10 /10000
: 0 /10000
: 0 /30000