How To Display Other Ship's Information - Furuno FAR-1416 Operator's Manual

5. Select the desired option, then press the left button.
1) Between two points: [BTWN 2PTS]
Select the start point and the terminal point on the track. The track line be-
tween the two points will be edited. Specify the color and line type, then press
the left button to change.
2) Set range: [SET RNG]
Select start point and terminal point of the area to edit. Select a color and a line
type then select [RUN] and press the left button.
3) Within range: [WITHIN RNG]
Select a color and a line type, then select [RUN] and press the left button. All
tracks displayed on the screen will be edited.
4) Out of range: [OUT OF RNG]
Select a color and a line type, then select [RUN] and press the left button. All
tracks not displayed on the screen will be edited.
6. Press the right button to close the menu.
5.1.10

How to display other ship's information

You can display other ship's information on the screen.
Basic information
1. Press the CURSOR DISP key when the cursor is not shown.
2. Place the cursor on the target whose information you want to view.
The information for the selected target appears. If there is no data, [- -] appears.
Other ship's
information
Note 1: If the target information is not shown, do the following procedure.
1) Open the [MAIN MENU].
2) Select [OTHER SHIP'S INFO.], then press the left button.
3) Select [NEXT], then press the left button.
4) Select [TARGET CURSOR INFO.], then press the left button.
5) Select [ON], then press the left button.
6) Press MENU key to close menu.
Detailed information
1. Press the CURSOR DISP key when the cursor is not shown.
Cursor
NAME FURUNO
LAT 351° 8.3085' N
LON 135° 30.3529' E
DIST 1.075NM
BRG 151.3°T
5. VIDEO PLOTTER OPERATION
Target symbol
Target number
5-11