How To Edit The Own Ship's Track - Furuno FAR-1416 Operator's Manual

5. VIDEO PLOTTER OPERATION
2) Set range
Select start point and terminal point of the area to
erase. Select a color and a line type then select
[RUN] and press the left button. The specified
tracks within the selected area are deleted.
3) Within range
Select a color and a line type, then select [RUN]
and press the left button. The specified tracks within the area displayed on
the screen are deleted.
4) Out of range
Select a color and a line type, then select [RUN] and press the left button. The
specified tracks outside of the area displayed on the screen are deleted.
5) All
Select a color and a line type, then select [RUN] and press the left button. All
specified tracks are deleted.
6. Press the right button to close the menu.
5.1.9

How to edit the own ship's track

You can edit tracks after you reach port with one of the four methods listed below. Both
current track and playback track cannot be edited at the same time.
• Two points: edits the track line between the points specified with the cursor.
• Set range: edits the track line by color or line type within the specified area.
• Within range: edits all track lines displayed on the screen by color or line type.
• Out of range: edits all track lines not displayed on the screen by color or line type.
Note 1: Recorded tracks which are selected at [ADD] from [PLAY OWN TRK] in the
[INT. MEMORY PLAYBACK] menu cannot be deleted.
Note 2: When tracks are recorded and colored according to temperature or depth, and
the color in use immediately before selecting the method to delete tracks is the same
color, all temperature and depth tracks of that color will also be deleted.
1. Open the [MAIN MENU].
2. Select [TRACK], then press the left button.
3. Select [EDIT TRACK], then press the left button.
The [EDIT TRACK] window appears.
4. Confirm [SEL METH.] selected, then press the left button.
5-10
EDIT TRACK
SEL METH. 1. BTWN 2 PTS 2. SET RNG 3. WITHIN RNG
4. OUT OF RNG
NO. OF TRK PTS SEL.0
RUN
TURN WHEEL : SELECT PRESS LEFT BUTTON : ENTER
PRESS RIGHT BUTTON : CLOSE
Start point
Terminal
point
(cursor)
White frame (effective area)