Zoom; How To Use The Zoom Functions - Furuno FAR-1416 Operator's Manual

Note: When the [TRUE VIEW] is set to [ON] of the [ECHO 2/2] menu, this feature is
not used.
To activate the wiper feature, do the following:
1. Open the [MAIN MENU].
2. Select [ECHO], then press the left button.
3. Select [WIPER], then press the left button.
4. Rotate the scrollwheel to cycle through and select
the desired setting. The options, in order, are: OFF
1
With the desired setting selected, press the left but-
ton.
5. Close the menu.
1.27

Zoom

The zoom function enlarges an area of interest as large as twice the normal viewing
size, in the [INFORMATION BOX]. Zoom can be selected using the control unit or from
a preset function key (see section 1.13 for how to assign functions to the function
keys).
1.27.1

How to use the zoom functions

To enable/disable the zoom magnification, select the appropriate zoom setting
([2TIMES]: Enables magnification at 2 , or [3TIMES]: Enables magnification at 3 )
from the [ZOOM] option in the [INFORMATION BOX] menu. (See section 1.9.)
Note: Zoom is not available when the [TRUE VIEW] setting for [ECHO 2/2] is [ON].
1. Press the CURSOR ON/OFF key, if the cursor is not shown.
2. Rotate the scrollwheel to select [ZOOM SET], then press the left button.
3. Move the cursor inside the operational display area, then press the left button.
The cursor is now displayed with a zoom box.
4. Move the cursor and zoom box at the location you wish to zoom, then press the
left button.
5. Press the right button to complete the procedure. The selected area is displayed
on the right-side of the screen and the cursor returns to normal shape.
To disable the zoom function, repeat steps 1 to 3. At step 3, the zoom box is removed
from the cursor.
2 OFF...
Cursor with
zoom box
1. OPERATIONAL OVERVIEW
[ECHO 1/2]
1. BACK
2. [CUSTOMIZE ECHO]
3. TUNE INITIALIZE
4. [TRAIL]
5. 2ND ECHO REJ
OFF/ON
6. SART
OFF/ON
7. WIPER
OFF/1/2
8. ZOOM
OFF/2TIMES/3TIMES
9. ZOOM DISPLAY
STAB GND/STAB HDG/
STAB NORTH
Zoom box is placed
at the location to be
zoomed and the
cursor returns to its
normal shape.
1-31