How To Delete Routes; How To Search Routes - Furuno FAR-1416 Operator's Manual

5.5.3

How to delete routes

Note: This function is enabled when [ROUTE SELECT] is set to [IN] on [ROUTE/
WAYPOINT] menu.
1. Open the [MAIN MENU].
2. Select [ROUTES/WAYPOINTS], then press the left button.
3. Select [ROUTE LIST], then press the left button.
4. Select a route to delete, then press the CANCEL key.
The following confirmation menu appears.
5. Select [RUN], then press the left button.
The route will be deleted.
6. Close the menu.
5.5.4

How to search routes

To search the routes from the [ROUTE LIST], do the following procedures.
How to search from route sorting
1. Open the [MAIN MENU].
2. Select [ROUTES/WAYPOINTS], then press the left button.
3. Select [ROUTE LIST], then press the left button.
4. Select [SORT], then press the left button.
5. Select the sort method from list, then press the left button.
1) ALPHA. ORD: sorts the routes, in alphanumerical order.
2) RNG ORDER: sorts the routes by range from own ship.
3) REG. ORDER: sorts the routes according to the time and date at which they
were entered.
6. Close the menu.
How to search from route name
1. Open the [MAIN MENU].
2. Select [ROUTES/WAYPOINTS], then press the left button.
3. Select [ROUTE LIST], then press the left button.
4. Select [SEARCH], then press the left button.
The character input window appears.
5. Enter the first few characters of the name you want to search for, then select
[RUN] and press the left button.
The route which match your search appear at the top of the list.
6. Close the menu.
DELETE ROUTE NAME
XXXXXX.
ARE YOU SURE?
RUN CANCEL
5. VIDEO PLOTTER OPERATION
5-37