How To Set The Loran/Decca - Furuno FAR-1416 Operator's Manual

1.46

How to Set the Loran/Decca

When using Loran A time offset
1. Open the [MAIN MENU].
2. Select [NAV DATA], then press the left button.
3. Select [NEXT], then press the left button.
4. Select [LORAN/DECCA SETTINGS], then press the left button.
There are two pages for [LORAN DECCA SETTING] window. If the second page
is appeared, press the MARK SELECT key to go back to the first page.
5. Select [LORAN A STA. COMB.], then press the left button.
6. Set the station combination refer to the [CH CODE LIST] lower side of the window.
7. Select [TIME OFFSET 1], then press the left button.
8. Rotate the scrollwheel and press the left button to set the time offset value.
9. Select [TIME OFFSET 2], then press the left button.
10. Rotate the scrollwheel and press the left button to set the time offset value.
11. Press the MARK key to go to second page.
12. Select [TIME DIFF. DISP TYPE], then press the left button.
13. Select [LORAN A], then press the left button.
14. Close the menu.
When using Loran C time offset
1. Open the [MAIN MENU].
1. OPERATIONAL OVERVIEW
1-63