5. Select [INNER] or [OUTSIDE], then press the left button.
Cursor moves to the value of [MINIMUM SPEED].
6. Move the scrollwheel and set the minimum speed, then press the left button.
Cursor moves to the value of [MAXIMUM SPEED].
7. Rotate the scrollwheel to set the maximum speed, then press the left button.
8. Close the menu.
To deactivate either alarm, select [OFF] at step 5.
5.7.6
How to set trip range alert
The trip range alert informs you when you have traveled a certain distance.
1. Press the MENU key to open the [MAIN MENU].
2. Select [ALERT SETTINGS], then press the left button.
3. Select [ARRIVAL/ANCHOR ALERT], then press the left button.
4. Select [TRIP RANGE ALERT], then press the left button.
5. Select [ON], then press the left button.
Cursor moves to the value of [TRIP RANGE].
6. Rotate the scrollwheel to set the range, then press the left button.
7. Close the menu.
To deactivate either alert, select [OFF] at step 5.
How to reset the trip range
1. Press the MENU key to open the [MAIN MENU].
2. Select [ALERT SETTINGS], then press the left button.
3. Select [ARRIVAL/ANCHOR ALERT], then press the left button.
4. Select [TRIP RANGE RESET], then press the left button.
A confirmation box appears.
5. Select [RUN], then press the left button.
Trip range resets.
5.7.7
How to set the water temperature alert
The water temperature alert is a function alerts you when the water temperature is
higher or lower than the range set.
Note: The water temperature alert requires a water temperature sensor.
SET TRIP METER TO ZERO.
ARE YOU SURE?
RUN
CANCEL
5. VIDEO PLOTTER OPERATION
5-49