Furuno FAR-1416 Operator's Manual page 24

1. OPERATIONAL OVERVIEW
2. Place the cursor on the radar effective area by operating the trackball, then rotate
the scrollwheel to select a function required.
The cursor control window appears and the cursor shape border shown in red.
Note: If there is no operation for 30 seconds, the cursor control window disap-
pears and the function is reset.
3. Use the trackball to move the cursor to the location to use the function.
4. Press the left button.
5. To quit the selected function, press the right button.
The cursor control window disappears and the cursor shape is reset.
TARGET CANCEL
TT TARGET DATA & ACQ
EBL OFFSET
OFF CENTER
ZOOM SET
MARK DELETE
DELETE OTHER TRACK
CHART ALIGN
TRAIL ERASER SELECT
SET CIRCLE LINE
MARK ATTRIBUTE CHANGE
1-10
[L]: TARGET CANCEL
[L]LONG: ALL TGT CANCEL
TURNWHEEL: CURSOR SELECT
Menu Item Description
TT: Cancels tracking on selected tracked target.
AIS: Sleeps selected AIS target.
Acquires selected echo as tracked target.
Offsets EBL to measure range and bearing between
two targets.
Shifts screen center to selected location.
Zooms selected location.
Deletes selected mark (plotter mark, origin mark or
waypoint mark).
Deletes own ship's tracks.
Aligns chart positions with the radar picture.
Erases trails.
Set the circle line.
Change the mark attributes.