How To Turn The Radar On/Off - Furuno FAR-1416 Operator's Manual

Standards used in this manual
This manual uses the following standards:
Terminology
standards
Select
Left-click
Right-click
Left button
Right button
Control unit
Trackball control unit
Open the [MAIN MENU]. • Press the MENU key to open the main menu.
Close the menu.
For the sake of brevity, the procedures in this manual use the terms "Open the [MAIN
MENU]." and "Close the menu."
Most operations can be done with either the trackball control unit RCU-030 or the con-
trol unit RCU-029. Throughout this manual, procedures are outlined using the RCU-
029 control unit, unless otherwise specified.
The display unit is available portrait type or landscape type. This manual is using the
portrait type for explanations.
How to remove the hard cover
Press the middle of the hard cover with your thumbs and pull off the cover with other
fingers toward you.
1.2

How to Turn the Radar On/Off

The POWER switch
POWER switch cover and press the switch to turn the radar system on. To turn the
system off, press and hold the POWER switch. The screen shows the bearing scale
and digital timer for approximately 90 seconds (FAR-1416) or three minutes (FAR-
• Using the trackball, move the cursor over the item to be "selected".
• Rotate the scroll wheel to highlight the item to be "selected".
Press the left button on the RCU-029.
Press the right button on the RCU-029.
Refers to the left button on the RCU-029.
Refers to the right button on the RCU-029.
Refers to the control unit RCU-029.
Refers to the trackball control unit RCU-030.
• Select the [MENU] box, then left-click.
• Press the MENU key to close the menu. (Closes all open menus.)
• Select the operational display area, then right-click.
• Select the [MENU] box, then right-click.
is located at the top left corner of the control unit. Open the
1. OPERATIONAL OVERVIEW
Meaning
1-3