How To Select A Range Scale - Furuno FAR-1416 Operator's Manual

1. OPERATIONAL OVERVIEW
guidance. The operational guidance shows the function of the left button "[L]",
right button "[R]" and the scrollwheel "WHEEL".
The [PULSE] box, for example, displays the operational guidance "PULSE
SHORT / PULSE LONG/ SELECT PULSE". In this case you would left-click to
select short pulse or right-click to select long pulse.
2. Press the left button to select the desired setting.
3. Rotate the BRILL knob to adjust the display bril-
liance.
4. Press the MENU key to open the main menu.
5. Select [INITIAL SETTING], then press the left button
to display the [INITIAL SETING] menu.
6. Select [BRILL SETTING], then press the left button.
7. Select the desired menu item, then press the left but-
ton.
8. Select the appropriate option, then press the left but-
ton.
Further settings are required, select [NEXT], then
press the left button.
9. Press the MENU key to close the menu.
1.10

How to Select a Range Scale

The selected range scale, range ring interval and pulselength are shown at the upper
left corner on the screen. When a target of interest comes closer, reduce the range
scale so that it appears in 50-90% of the display radius.
TX display
Press the +/- key on the RANGE button to select radar range scale.
[+]: raise the range, [-]: lower the range.
Press and hold the [+] or [-] key to change the range scale continuously.
ST-BY display
Press the +/- key on the RANGE button to select plotter range scale. The range scale
indicates the distance of screen width.
[+]: expands the range scale on cursor (at cursor 'On') or own ship's position (at cursor
'Off').
[-]: reduces the range scale on cursor (at cursor 'On') or own ship's position (at cursor
'Off').
Press and hold the [+] or [-] key to change the range scale continuously.
Select range scale on the box menu
1. Press the CURSOR ON/OFF key when cursor is not shown.
1-14
[BRILL1 MENU 1/3]
1. BACK
2. INITIAL SETTING READ
DAY/DUSK/NIGHT
NO/YES
3. ECHO COLOR
YEL / GRN / WHT
AMB/M-GRN/M-CHA
4. CHAR COLOR
GRN/WHT1/WHT2/ORG/RED
5. RADAR BACKGROWND COLOR
BLK/BLU1/BLU2
6. CONTROL PANEL
7. CHARACTER
8. CURSOR
9. ECHO
0. NEXT