Transfer The Data From Usb Flash Memory - Furuno FAR-1416 Operator's Manual

14. Close the menu.
6.3.5

Transfer the data from USB flash memory

The data in USB memory are transfered to internal memory with following procedure.
1. Insert the USB flash memory to the USB port.
2. Open the [MAIN MENU].
3. Select [MEMORY REC./PLAY.], then press the left button.
4. Select [TRF USB TO INT. MEMORY], then press the left button.
5. Select the item to transfer, then press the left button.
6. Select [Yes], then press the left button.
7. Repeat the step 4 and 5 for other data transferring.
8. Select [SEL DATUM], then press the left button.
9. Select [WGS-84] or [TOKYO], then press the left button.
In generally, default setting WGS-84 is available.
10. Select the file to transfer from the data selection list.
11. Enter the comment to refer to page 1-16.
"TRANSFER [XXXXXX.csv] TO INTERNAL MEMORY. ARE YOU SURE?" is ap-
peared. (XXXXXX: filename entered)
12. Select [RUN], then press the left button.
A message informing you that the transfer is in progress is displayed, followed by
a confirmation that the transfer process is complete.
13. Confirm the message, then press the left button.
14. Close the menu.
TRF USB TO INTERNAL MEMORY
REC OWN TRK
: YES
REC OTHER TRK
: YES
REC MARK/TRACK
: YES
REC ROUTE/WPT
: YES
SEL DATUM
: WGS-84
DOWNLOAD SETTING
: YES
DATA SELECTION
FILE NAME OWN TRK OTR TRK
201607231746.csv 5370 0
CURRENT USAGE OWN TRK
OTHER TRK (CONS)
OTHER TRK (AIS)
OTHER TRK (TT)
OTHER TRK (GPS BUOY)
MARK/LINE
TURN WHEEL : SELECT PRESS LEFT BUTTON : ENTER
PRESS RIGHT BUTTON : CLOSE
SELECT THE FILE TO RECORD
6. DATA SAVE AND READ
NO
NO
NO
NO
TOKYO
NO
SEL PAGE_
MARK WPT ROUTE
0 0 0
: 1037 /30000
: 0 /10000
: 32 /10000
: 16 /10000
: 0 /10000
: 6 /30000
6-9