How To Replace The Fuse; Life Expectancy Of Major Parts - Furuno FAR-1416 Operator's Manual

Multi-color lcd radar
Table of Contents

Advertisement

7.2

How to Replace the Fuse

A fuse is located on the interface board of the display unit. The fuse protects the equip-
ment from reverse polarity of the ship's mains and equipment fault. If a fuse blows, find
the cause before replacing it. Use the correct fuse. Using the wrong fuse will damage
the equipment and void the warranty.
Power
24 VDC
7.3

Life Expectancy of Major Parts

This radar has consumable parts, and the table that follows shows the estimated life
expectancy for the consumable parts. Life expectancy estimates are based on use un-
der normal conditions. Request a FURUNO agent or dealer to replace the consumable
parts, to get the best performance and longest possible life from the equipment.
Part
Type
Antenna
RM-8025
motor
RM-8711
Magnetron
MAF1565N
M1458F
Note: The magnetron is a consumable item. The effectiveness of your magnetron will
decrease over time, causing lower-than-normal signal strength and loss of echoes.
Magnetron should be changed regularly. The table above shows the typical life-span
of a magnetron used under normal conditions.
WARNIN
WARNING
Use the proper fuse.
Use of the wrong fuse can cause fire or
electrical shock.
Type
FGMB-S 125V 10A PBF
Use
Life expectancy
for 24 rpm
10,000 hours
for 48 rpm
for 12 kW
5,000 hours
for 25 kW
7. MAINTENANCE, TROUBLESHOOTING
Code No.
000-157-470-10
Remarks
Check no. of hours used at TX time.
Reset time after replacement.
7-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Far-1426

Table of Contents