Track; Plotting Own Ship's Track - Furuno FAR-2807(-D) series Operator's Manual

5.9

Track

5.9.1

Plotting own ship's track

A total of 20,000 points are allotted for storage of own ship's track, marks and
lines. When this memory becomes full, the oldest track is deleted to make room
for the latest. For that reason you may want to adjust the recording interval to
conserve the memory.
The table below shows the relation between plotting interval and maximum track
recording time.
Interval
10 s
30 s
1 min
1. Left-click the MENU box to open the menu.
2. Select 5 [PLOTTER] to open the PLOTTER menu.
1 BACK
2 CHART COLOR*
3 OWN TRACK INTERVAL
4 OWN TRACK COLOR
5 TGT TRACK INTERVAL*
6 TGT TRACK COLOR*
7 CURSOR L/L ALIGN
8 [DATA ERASE]
9 [DISPLAY]
0 AUTO TARGET TRACK*
3. Select 3 OWN TRACK INTERVAL.
4. Select appropriate option. Select OFF to stop plotting own ship's track.
DRAW displays the track but does not record it. Track is erased when the
power is turned off or the range is changed.
5. Push the right button twice to close the menu.
Own track plotting interval and storage time
Max. Recording Time
55 hr 30 min
166 hr 40 min
13 days 21 hr 20 min
[PLOTTER]
GRN/YEL/CYA
ORANGE/GRAY
OFF/DRAW/10S/30S/
1M/2M/3M/6M/15M
RED/GRN/BLU/YEL/
CYA/MAG/WHT
OFF/DRAW/10S/30S/
1M/2M/3M/6M/15M
RED/GRN/BLU/YEL/
CYA/MAG/WHT
OFF/ON
OFF/ON
5. VIDEO PLOTTER OPERATION
Interval
2 min
3 min
6 min
* Not available on IMO type
PLOTTER menu
Max. Recording Time
27 days 18 hr 40 min
41 days 16 hr
83 days 8 hr
5-13