Own Ship's Track; How To Set The Plotting Interval; How To Set The Own Ship Track Color - Furuno FAR-1513 Operator's Manual

5. VIDEO PLOTTER OPERATION
5.4

Own Ship's Track

A total of 1,200 points are allotted for storage of own ship's track, marks and lines.
When this memory becomes full, the oldest track is deleted to make room for the lat-
est. For that reason you may want to adjust the recording interval to conserve the
memory.
The table below shows the relation between plotting interval settings and maximum
track recording time.
Interval
15 s
30 s
1 min
2 min
5.4.1

How to set the plotting interval

1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [OWN TRACK], then push the ADJUST knob.
4. Select [SAVE INTERVAL], then push the ADJUST knob.
5. Select the appropriate setting, then push the ADJUST knob.
6. Close the menu.
5.4.2

How to set the own ship track color

1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [OWN TRACK], then push the ADJUST knob.
4. Select [OWN TRACK COLOR], then push the ADJUST knob. The following colors
are available.
Non-IMO type
• [RED] (Red)
• [GRN] (Green)
• [BLU] (Blue)
• [YEL] (Yellow)
• [CYA] (Cyan)
• [MAG] (Magenta)
• [WHT] (White)
5. Select the appropriate setting, then push the ADJUST knob.
6. Close the menu.
5-4
Max. Recording Time
5 hours
10 hours
20 hours
40 hours
OWN TRACK COLOR is not adjustable for IMO type radars.
Own track appears in (Cyan) color.
Interval
3 min 60 hours
6 min 120 hours
15 min 300 hours
DRAW ONLY No track data recorded.
IMO type
Max. Recording Time