Technical Specifications; Cp-Rio3-04 Rear I/O Module Main Specifications - Kontron CP3002 User Manual

CP-RIO3-04 Rear I/O
B.2

Technical Specifications

Table B-1: CP-RIO3-04 Rear I/O Module Main Specifications
CP-RIO3-04
USB
VGA
Ethernet
COM
SATA
Peripheral Control
Compact PCI
COM
Temperature Range Operational:
Climatic Humidity
Dimensions
Board Weight
Page B - 4
Two USB 2.0 interfaces; two 4-pin connectors
One VGA interface; 15-pin D-Sub connector
Two Gigabit Ethernet interfaces implemented as dual RJ-45 connector without LEDs
Two onboard, RS-232 serial ports with full modem support, COMA (COM1) and
COMB (COM2)
On the 8HP version, the serial ports are routed to the front panel and implemented as
two 9-pin D-Sub connectors.
Two SATA interfaces implemented as two 7-pin, L-form standard SATA connectors
One 10-pin, 2.54 mm onboard connector for power supply management
CompactPCI connector for connecting rear I/O to the backplane
Two COM ports implemented as two 10-pin, 2.54 mm onboard connectors (4HP only)
full modem support
0°C to +60°C
Storage: -55°C to +85°C
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
100 mm x 80 mm
4HP: 120 grams
8HP: 150 grams
SPECIFICATIONS
CP3002
ID 1042-9252, Rev. 2.0