Device Protection Register (Dprot) - Kontron CP3002 User Manual

Configuration
4.3.5

Device Protection Register (DPROT)

The Device Protection Register holds the write protect signals for flash devices.
Table 4-7:

Device Protection Register (DPROT)

REGISTER NAME
ADDRESS
BIT NAME
7 - 3 Res. Reserved
2 SFWP SATA Flash module write protection:
0 = SATA Flash module not write protected
1 = SATA Flash module write protected
Writing a '1' to this bit sets the bit. If this bit is set, it cannot be
cleared.
1 EEWP EEPROM write protection:
0 = EEPROM not write protected
1 = EEPROM write protected
Writing a '1' to this bit sets the bit. If this bit is set, it cannot be
cleared.
0 BFWP SPI boot flash write protection:
0 = SPI boot flash not write protected
1 = SPI boot flash write protected
Writing a '1' to this bit sets the bit. If this bit is set, it cannot be
cleared.
Page 4 - 8
DEVICE PROTECTION REGISTER (DPROT)
0x284
DESCRIPTION
CP3002
RESET
ACCESS
VALUE
00000 R
0 R/W
0 R/W
0 R/W
ID 1042-9252, Rev. 2.0