Kontron CP3002 User Manual page 33

CP3002
Table 1-1: CP3002 Main Specifications (Continued)
FEATURES
Watchdog Timer
System Timer
Thermal Management
TPM
uEFI BIOS
Operating Systems
ID 1042-9252, Rev. 2.0
Software-configurable, two-stage Watchdog with programmable timeout
•
ranging from 125 ms to 4096 s in 16 steps
Serves for generating IRQ or hardware reset
•
The Intel® QM57 chipset contains three 8254-style counters which have
•
fixed uses
In addition to the three 8254-style counters, the Intel® QM57 chipset in-
•
cludes eight individual high-precision event timers that may be used by
the operating system. They are implemented as a single counter each
with its own comparator and value register.
CPU and board overtemperature protection is provided by:
Temperature sensors integrated in processor:
•
Two temperature sensors for monitoring the processor cores
•
One temperature sensor for monitoring the graphics controller and
•
the memory controller
One temperature sensor integrated in the Intel® QM57 chipset for mon-
•
itoring the chipset
Specially designed heat sink
•
Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-
based data and system security (on request)
AMI Aptio®, AMI's next-generation BIOS firmware based on the uEFI Specifi-
cation and the Intel Platform Innovation Framework for EFI.
LAN boot capability for diskless systems (standard PXE)
•
Redundant image; automatic fail-safe recovery in case of a damaged
•
image
Non-volatile storage of setting in the SPI flash (battery only required for
•
the RTC)
Compatibility Support Module (CSM) providing legacy BIOS compatibil-
•
ity based on AMIBIOS8
Command shell for diagnostics and configuration
•
EFI shell commands executable from mass storage device in a Pre-OS
•
environment (open interface)
There are various operating systems available for the CP3002. For detailed
information, please contact Kontron.
SPECIFICATIONS
Introduction
Page 1 - 13