Kontron CP3002 User Manual page 32

Introduction
Table 1-1: CP3002 Main Specifications (Continued)
FEATURES
Serial
Serial ATA
I/O Expansion Inter-
faces
Front Panel Connectors
Onboard Connectors
LEDs
Page 1 - 12
Two 16C550-compatible UARTs:
COMA available on the 8HP expansion module or on rear I/O
•
COMB available on rear I/O only
•
Serial ATA Host Controllers integrated in the Intel® QM57 chipset:
Provide support for six SATA ports, two onboard, two on rear I/O, and
•
two on the 8HP extension module
Data transfer rates up to 300 MB/s
•
High-performance RAID 0/1/5/10 functionality on all SATA ports
•
I/O expansion to 8HP board version:
2x SATA
•
2x USB2.0
•
DP (DisplayPort)
•
COMA
•
Monitor and control signals
•
LPC
•
HDA
•
PCI Express
•
VGA: 15-pin D-Sub connector
•
USB: two 4-pin, type A connectors
•
Ethernet: dual RJ-45 connector
•
7-pin, L-form standard SATA II connector, J3
•
High-speed I/O extension connector, J12
•
SPI extension connector, J4
•
18-pin extension connector for SATA Flash module (SSD), J5
•
JTAG connector, J13
•
XDP-SFF (debug) connector, J14
•
CompactPCI Connectors J1 and J2
•
Two 204-pin DDR3 SODIMM sockets
•
Watchdog and Overtemperature Status LEDs:
WD (green):
•
TH (red/green):
•
General Purpose LEDs:
LED0..3 (red/green/red+green): General Purpose / POST Code
•
Ethernet LEDs:
ACT (green):
•
SPEED (green/orange):
•
SPECIFICATIONS
Watchdog Status
Overtemperature Status
Network / Link Activity
Network Speed
ID 1042-9252, Rev. 2.0
CP3002