CP3002
1.5
Technical Specification
Table 1-1:
CP3002 Main Specifications
FEATURES
CPU
Memory
ID 1042-9252, Rev. 2.0
The CP3002 supports the following microprocessors:
Intel® Core™ i7-610E (SV), 2.53 GHz, 4 MB L3 cache
•
Intel® Core™ i7-620LE (LV), 2.0 GHz, 4 MB L3 cache
•
Intel® Core™ i7-660UE (ULV), 1.33 GHz, 4 MB L3 cache
•
Intel® Celeron® U3405 (ULV), 1.07 GHz, 2 MB L3 cache
•
Further processor features:
Two execution cores
•
Intel® Hyper-Threading Technology (Core™ i7)
•
Intel® 64 Architecture
•
Intel® Turbo Boost Technology (Core™ i7)
•
Intel® Intelligent Power Sharing (Core™ i7)
•
System Memory interface with optimized support for dual-channel
•
DDR3 SDRAM memory at 1066 MHz with ECC
Integrated 2D and 3D Graphics Engines
•
DMI and FDI interfaces to the Intel® QM57 chipset
•
Two x8 PCI Express 2.0 ports operating at 2.5 GT/s
•
Please contact Kontron for further information concerning the suitability of
other Intel processors for use with the CP3002.
Main Memory:
Up to 8 GB, dual-channel DDR3 SDRAM memory with ECC running at
•
1066 MHz on two SODIMM sockets
Cache Structure:
64 kB L1 cache for each core
•
32 kB instruction cache
•
32 kB data cache
•
Up to 512 kB L2 shared instruction/data cache for each core
•
Up to 4 MB L3 shared instruction/data cache shared between both cores
•
Flash Memory:
Two redundant SPI boot flashes (2 x 8 MB) for two separate uEFI BIOS
•
images
Up to 16 GB NAND flash via an onboard Serial ATA Flash module (SSD)
•
Serial EEPROM with 64 kbit
SPECIFICATIONS
Introduction
Page 1 - 9