Board Overview - Kontron CP3002 User Manual

CP3002
1. Introduction
1.1

Board Overview

The CP3002 is a highly integrated 3U, 4HP CompactPCI system controller board optionally
expandable to 8HP and available either as a front I/O version or as a rear I/O version. It has
been designed to support the multi-chip package Intel® Core™ i7 processor and the Intel®
Celeron® processor in combination with the mobile Intel® QM57 Express chipset.
The board supports the Intel® Core™ i7-610E processor with 2.53 GHz frequency, the Intel®
Core™ i7-620LE processor with 2.0 GHz frequency, and the Intel® Core™ i7-660UE processor
with 1.33 GHz frequency, all with 64 kB L1 cache, 256 kB L2 cache and 4 MB L3 cache, as well
as the Intel® Celeron® U3405 processor with 1.07 GHz frequency and 64 kB L1 cache, 512
kB L2 cache, 2 MB L3 cache. The processors are built on 32-nm technology and provided in a
BGA package.
The processor is soldered on the CP3002 which results in higher Mean Time Between Failures
(MTBF) and a significant improvement in cooling.
Two SODIMM sockets are available on the CP3002 to provide up to 8 GB dual-channel, third-
generation Double Data Rate (DDR3) memory with Error Checking and Correcting (ECC)
running at 1066 MHz. The graphics controller and the memory controller are integrated in the
processor.
The board comes with two Gigabit Ethernet ports with Wake-on-LAN support (available on front
I/O and switchable to rear I/O), one high-resolution VGA interface (CRT), two COM ports, as well
as one onboard high-speed I/O extension connector for flexible 8HP expandability. In addition,
six SATA interfaces are provided, one for the onboard SATA connector, one for the SATA Flash
module, two for the high-speed I/O extension connector and two for rear I/O. Further interfaces
include up to six USB 2.0 ports, two on front I/O, two on rear I/O, two for the onboard high-speed
I/O extension connector. The CP3002 provides support for one 8HP I/O expansion module
(CP3002-HDD) and one rear I/O module (CP-RIO3-04). The 4HP CP3002 further provides sup-
port for up to 16 GB SATA NAND flash memory (SSD) via a SATA Flash
module cannot be used in conjunction with the CP3002-HDD module.
The board supports one 32-bit/33 MHz CompactPCI interface. When installed in the system
slot, the interface is enabled, and when installed in a peripheral slot, the CP3002 is isolated
from the CompactPCI bus.
The CP3002 further provides safety and security features via a Trusted Platform Module (TPM)
1.2 on request.
Designed for stability and packaged in a rugged format, the board fits into all applications
situated in industrial environments, including I/O intensive applications where only one slot is
available for the CPU, making it a perfect core technology for long-life applications.
Components which have high temperature tolerance have been selected from embedded
technology programs, and therefore offer long-term availability.
There are various operating systems available for the CP3002. For detailed information, please
contact Kontron.
ID 1042-9252, Rev. 2.0
Introduction
module. The SATA Flash
Page 1 - 3