Kontron CP3002 User Manual page 34

Introduction
Table 1-1: CP3002 Main Specifications (Continued)
FEATURES
Mechanical
Power Consumption
Temperature Range
Battery
Climatic Humidity
Dimensions
Board Weight
Note ...
For a description of the additional 8HP version interfaces, refer to Appendix A,
CP3002-HDD Module.
Page 1 - 14
3U, 4HP, CompactPCI-compliant form factor
See Chapter 5 for details.
Operational: 0°C to +60°C
-25°C to +70°C
Storage: -55°C to +85°C
Note ...
When a battery is installed, refer to the operational specifications
of the battery as this determines the storage temperature of the
CP3002 (See "Battery" below).
Note ...
When additional components are installed, refer to their opera-
tional specifications as this will influence the operational and stor-
age temperature of the CP3002.
3.0V lithium battery for RTC with battery socket.
Recommended type: CR2025
Temperature ranges:
Operational (load): -20°C to +70°C typical (refer to the battery manufac-
Storage (no load): -55°C to +70°C typical (no discharge)
93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78)
100 mm x 160 mm
337 grams (4 HP CP3002 with heat sink, front panel, two 2 GB SODIMM mem-
ory modules, and battery but without SATA Flash module)
SPECIFICATIONS
Standard (depending on processor version
and airflow in the system)
Extended (depending on processor version
and airflow in the system)
Without hard disk and without battery
turer's specifications for exact range)
ID 1042-9252, Rev. 2.0
CP3002