Dukane iq series User Manual page 79

Erase Setup
>
Move the next to ERASE SETUP as shown in the
Figure 5-45.
The current setup or all setups can be erased.
Erase Current Setup
Press the CURRENT SETUP soft key to bring up the
display shown in Figure 5-46.
Pressing YES will return the setup (that is currently being
run or edited) to default values.
Pressing NO or CANCEL will return the display to the
SETUPS menu without erasing anything.
Erase All Setups
Pressing ALL SETUPS (as seen in Figure 5-45 above)
affects all setups in the generator returning them all to
default values.
The screen message, if ALL SETUPS was selected, would
read:
ARE YOU SURE YOU WANT TO ERASE
ALL SETUPS?
Confirm Erase
When YES is pressed, the screen shown in Figure 5-47
is displayed for about 5 seconds. Then, the ERASE setup
menu is shown.
If ALL SETUPS was chosen in the setup menu, the mes-
sage would be: ALL SETUPS ERASED.
Dukane Manual Part No. 403-586-02
Continued from Previous Page
Figure 5-45 Setups Menu, Erase Setup
Figure 5-46 Setups Menu, Question Erase
Figure 5-47 Setups Menu, Confirm Erase
SETUP CONTROL
CURRENT SETUP
NAME SETUP
COPY SETUP
>
ERASE SETUP
ALL SETUPS
PRE
POST
AMP WELD
WELD
WELD
YES
ARE YOU SURE YOU WANT TO
ERASE THIS SETUP?
NO
PRE
POST
AMP WELD
WELD
WELD
SETUP ERASED
PRE POST
AMP WELD
WELD WELD
Section 5 - Operation
ONLINE
LIMITS LIVE
SETUPS OPERATE
ONLINE
LIMITS LIVE
SETUPS OPERATE
ONLINE
LIMITS LIVE
SETUPS OPERATE
Page 71