Dukane iq series User Manual page 30

iQ
Series Ultrasonic Press System LE User's Manual
Pin
1 +22V
2 Spare Output
3 +22V Power Ground
4 Programmable Status Output 1
5 Programmable Status Output 2
6 Ultrasound Active Status Output
7 Any Fault Status Output
8 Press Trigger Status Output
9 System Overload Status Output
10 System Online Status Output
11 Press Top of Stroke Status Output
12 Current Loop OK Status Output
13 Analog Monitor Signal Common
14 Not Used
15 Power Signal Monitor Output
16 Amplitude Monitor Output
17 Amplitude/Power Regulation Status Output
18 MPC Ready Status Output
19 System Power OK Status Output
20 Bad Part Status Output
21 Good Part Status Output
22 System Ready Status Output
23 Suspect Part Status Output
24 Isolated Common
25 Not Used
Table 3-III System Output Connector Signals (J3)
System Outputs Connector
The
SYSTEM OUTPUTS
erator I/O panel includes connections for all of the basic
system status and monitor output signals, which will typi-
cally connect to an automated control system. The cable
attached to this connector includes all of the available
system output signals, which will be read or monitored by
a digital input card or analog inputs on the user-supplied
automation controller.
The user can determine which signals are appropriate for
each welding application.
The system monitor output signals are analog signals used
to monitor ultrasonic amplitude setting and ultrasonic output
power levels, referenced to the Monitor Common (Pin 13).
This is at system chassis ground potential (non-isolated).
Page 22
Signal Name
connector mounted on the gen-
Cable Color Code Signal Option Requirements
BLK
WHT
RED
GRN
ORN
BLU
WHT/BLK
RED/BLK
GRN/BLK
ORN/BLK
BLU/BLK
BLK/WHT Not Used
RED/WHT
GRN/WHT
BLU/WHT
BLK/RED
WHT/RED
ORN/RED Not Used
BLU/RED
RED/GRN
ORN/GRN
BLK/WHT/RED
WHT/BLK/RED
RED/BLK/WHT
GRN/BLK/WHT
13
25 23
Figure 3–10 DB-25F, Generator Output Connector (J3)
1 3
15 17
Figure 3–11
11 9 7 5 3
21 19 17
5 7 9 11
19 21 23
DB-25M, Generator Output Cable
Connector
Dukane Manual Part No. 403-586-02
1
15
13
25
Continued