Overview; Generator Start-Up Sequence - Dukane iq series User Manual

Overview

The iQ Series generator, model LE, is typically part of a
system. System major components would be:
• iQ generator,
• iQ Press System, or
• iQ Probe System.
With this type of system, the user controls nearly all aspects
of the welding process through the front panel of the iQ LE
generator.
Generator Start-up
Sequence
1)
Press the rear panel AC breaker switch to ON. See
Figure 5-1.
2) The front panel power on light (See Figure 5-2.) will
flash RED a few times, then will glow a steady GREEN
The display's initial screen identifies the Dukane iQ
Series generator and its major components.
The start-up sequence ends when the OPERATE screen
is displayed.
Figure 5–2 Front Panel with Power On Light
Dukane Manual Part No. 403-586-02
Press, acoustic stack, and tooling will
require their own individual adjustments as
those components are integrated into your
particular system.
Helpful information on a wide variety of
assembly equipment, processes and
techniques can be found at the Dukane
website:
http://www .dukane .com/us/PPL_upa .htm
.
Figure 5–1 Rear Panel AC Breaker Switch
Section 5 - Operation
NOTE
(ON)
(OFF)
Power On Light
Page 55