Compressed Air Requirements; Ac Power Requirements - Dukane iq series User Manual

iQ
Series Ultrasonic Press System LE User's Manual

Compressed Air Requirements

For all press/thruster models, Dukane recommends 80-110 psi of clean, dry air.
Maximum available clamping pressure:
Model Force Generated at
110 psi (lb)
43Q220 540
Table 12- III Clamping Pressure

AC Power Requirements

T
he press/thruster uses 24VDC @ 2 Amps, obtained from the iQ Series generator to which
it is connected. The AC line voltage and current needed depend on whichever generator has
been chosen for your system. See the table below.
Operating
Generator
Model Number
Frequency
20kHz 20XX120-1X-XX-XX
20kHz 20XX120-2X-XX-XX
20kHz 20XX240-2X-XX-XX
20kHz 20XX360-2X-XX-XX
Table 12- IV AC Power Requirements
NOTES:
An X used above in the Model Numbers is a "wildcard" character meaning any valid character code combination.
Maximum line current requirement is specified at the minimum nominal AC line voltage and the rated power level.
Page 150
Standard Air Cylinder
Diameter (in)
2.50
Overload
Input AC Power Requirements
Power
Nominal AC Volt
Ratings
@ Maximum RMS Current
(Watts)
1200 100-120V 50/60 Hz @ 15 Amps
1200 200-240V 50/60 Hz @ 8 Amps
2400 200-240V 50/60 Hz @ 15 Amps
3600 200-240V 50/60 Hz @ 25 Amps
North America/
Japan
AC Outlet Rating
15 Amps
30 Amps
Dukane Manual Part No. 403-586-02