Press Controls; Manual Thruster Controls - Dukane iq series User Manual

iQ
Series Ultrasonic Press System LE User's Manual

Press Controls

This section describes the manual controls, indicators and
features of the Press/Thruster System.
If desired, the controls on the front of the thruster can be
used to manually set parameters for a given process.
Features used on the control panel are:
• Indicators associated with the controls to provide a
visual indication of the control settings.
• Metric measurements

Manual Thruster Controls

Refer to Figure 4-11 for the location of the controls.
Down Speed Adjustment
This control adjusts the downward velocity of the press/
thruster slide assembly. Turning the knob clockwise de-
creases the speed. Turning it counterclockwise increases
the speed of descent.
Hydraulic Slow Speed Control
)
(Optional
This control is used to adjust the point in the downstroke
where the hydraulic speed damper is engaged. The SLOW
SPEED Control knob adjusts to a point along the 7 inches
(177.8 mm) of total available downstroke distance that the
hydraulic Speed Control engages.
Refer to Section 6: Options, for detailed information on
the Hydraulic Slow Speed Control.
Page 46
NOTE
Total Stroke = 7 inches (177.800mm)
This is the thruster's maximum available
distance of travel.
Dukane Manual Part No. 403-586-02
Continued