If MANUAL or AUTOMATED PRESS MODE is se-
lected, and PRE-TRIGGER is enabled in the PRE-WELD
menu, then PRE-TRIGGER amplitude is available. See
Figure 5-6 to the right.
Pressing the AMP button when TRIGGER BY POWER is
enabled, brings up the screen shown to the right. This menu
has START as the top soft key. The value last accessed is
highlighted and ready to be changed. In the example shown
in Figure 5-7, that is START > AMPLITUDE.
Dukane Manual Part No. 403-586-02
Continued from Previous Page
Figure 5-6
Figure 5-7
PRE-TRIGGER
AMPLITUDE
WELD
PRE
POST
AMP
WELD
WELD
WELD
Setting Weld Amplitude, Pre-Trigger
Available
START
AMPLITUDE
WELD
PRE
POST
AMP
WELD
WELD
WELD
Setting Weld Amplitude with Trigger By
Power Enabled
NOTE
Amplitude Range = 20 -100%
Section 5 - Operation
Online
100%
LIMITS
LIVE
SETUPS
OPERATE
ONLINE
100%
PRESS ENTER TO ACCEPT
PRESS CANCEL TO ABORT
LIMITS
SETUPS
OPERATE
LIVE
Page 59